Is our first Mod is a very light one it has only 120 grams without 18650 battery with very small dimensions 80 x 30 x 25 mm is very ergonomic and a pleasure to hold in your hand.

The Pogany uses an N-channel mosfet capable of up to 100A current, it has 2 x blue LED and an intelligent chip to provide the on / off feature, low voltage detection, timeout and short protection.

All the electronics are epoxy sealed so the leaking off e-liquid won’t cause any problem.-

Mosfet:- N-Channel 30v 100A LFPAK, RDSon 1.35m Ω (typ), VGS(th) 1.46v (typ)
Operational voltage: 3.1 ± 0.1V – 4.20v
Low voltage protection: 3.1 ± 0.1V
Reverse polarity protection: Yes. Mod will auto fire but board will not burn out.
Idle current: <10uA
Timeout Protection: Yes
Amp Limit: 46.67A (4.2v @ 0.09Ω)
Low Resistance Protection: When resistance is 0.08 ± 0.01Ω LED’s flash 3 times and will
not power the mosfet. This is also Short Protection.
On/Off Function: When off, 5 clicks turns on and LEDs flash 5 times. When on, 5 clicks
turns off and LED’s flash 5 times.
Low Voltage: When battery is lower than 3.1 ± 0.1V LEDs flash 10 times and will not power
the mosfet.
Time Out Protection: If the mod is fired for 10 ± 1s the LEDs will flash 8 times and will stop
powering the mosfet.